Ask what gets specified in a building and the answer changes with the building. A hospital cares about clean air and medical gas. A chip plant cares about ultrapure water. A brewery cares about sanitary piping. Here are ten industrial and mission critical building types and the systems that define each one.
1. Data centers
Power and cooling at scale: switchgear, generators, uninterruptible power, chillers, liquid cooling loops, pumps, valves, fire suppression and controls.
2. Hospitals
Operating room air and pressure control, medical gas and vacuum, domestic water safety, steam for sterilizing, an essential electrical system and a central plant with backup.
3. Semiconductor fabs
Ultrapure water, cleanroom air handling, process cooling, specialty gas and chemical delivery, exhaust and scrubbers, and very tight vibration control.
4. Pharmaceutical and biotech plants
Clean steam, purified and injection grade water, sanitary stainless piping, cleanrooms, validated HVAC and documented commissioning.
5. Food and beverage plants
Sanitary piping and valves, washdown drainage, refrigeration, boilers and steam, clean in place systems and wastewater pretreatment.
6. Power plants
Circulating and condenser water, cooling towers, large valves and pumps, fuel handling, water treatment and emissions controls.
7. Water and wastewater treatment plants
Intake and pump stations, pipe galleries, chemical feed, blowers, clarifiers, large diameter valves and flow control, and the electrical and controls to run it all.
8. Cold storage and distribution centers
Ammonia or CO2 refrigeration, insulated panels, floor heating under freezers, dock doors and fire protection for high piled storage.
9. Battery and electric vehicle plants
Dry rooms, process cooling, large electrical loads, solvent and gas handling, and fire detection and suppression.
10. Central plants for campuses and airports
Chilled water and hot water production for many buildings, thermal storage, large pumps and valves, and the underground piping that connects it all.
What they have in common
Each of these buildings depends on a few systems that cannot fail: power, cooling, water, air and fire protection. The details change, but the questions stay the same. What is the failure cost? What are the standards? Who approves the manufacturers? And what has to be tested before the owner accepts the building?
Start with the full lists: data centers and hospitals. For the utility side, read inside the fence and outside the fence.








